Si Laboratories - Ultra-high performance protective coatings

Easy Clean coating protects equipment and facilities from, corrosion, machinery malfunction or reduced efficiency due to build up during production. High gloss coating, with extreme protective qualities, repels all forms of soiling including oil, grease, paint, mud, chemicals and petroleum waste.

Whilst erosion and corrosion and physical damage pose a threat to many industries, the real issues are downtime, efficiency decline, profit and loss and safety hazards.

Easy Clean non stick coating creates an abrasion resistant, slick, washable surface that cleans easily with rinsing and soap and water, reducing equipment down time for maintenance.

Use on all internal and external surfaces including equipment and facilities where protection against contaminants and ease of removal of pollutants is required.
Due to its flexibility ECS can be applied to rubber gaiters and hoses where it will protect and repel all forms of soiling whilst flexing and stretching with movement without cracking or sparring.

ECS is a environmentally sensitive coating, which is easy to apply, and cures and self levels to create a high gloss soil repellent finish giving exceptional protection to the surface.

ECS is available as clear and pigmented varieties. ECS is a one part product that requires to special surface preparation or primers. One applied it will tightly bond to substrates including:

Manufacturing and processing equipment
Elevators
Clean rooms
Dusty areas
Commercial kitchens
Garages
Assembly lines
Cafeterias
Subway terminals and stairwells.
Waste areas.
Painted surfaces.
Walls.
Plastic and rubberised surfaces.
Air ducts.
Conveyors.

ECS is an environmentally sensitive coating that will tightly bond to the substrate and will flex and stretch with structural changes (such as gaiters) without cracking or sparring.

ECS can be supplied translucent or self coloured. ECS can easily be applied to any surface with no special prior treatment such as a primer.

ECS is effective for approximately 10 years after application (subject to conditions and exposure).

After application ECS will self level and cure to a high gloss ‘mirror’ attractive architectural finish.

Due to its extreme hydrophobic and repellent properties it is believed that ECS will repel all forms of contamination and give exceptional protection to the surface against corrosion.

CHARACTERISTICS	COVERAGE PER LITRE
Ready to use solution, translucent or self coloured. No primer required. Single coat coverage.	Consumption depends on degree of porosity of the surface.
One treatment should last at least 10 years
Easy and safe to apply with a roller or brush.
Will flex and stretch to structural changes without cracking.	Average coverage 3-5m² per litre
Low voc content – minimal environmental impact.
Self levelling after application to a high gloss finish
Use outside or inside on all surfaces
Tough and durable anti-stick; non-stick finish.
Prevents surface deterioration from water and all forms of air borne pollution Resistant to almost all chemicals Suitable for immersion
Exceptional easy clean washable surface.

ECS is ready to use. Do not dilute before use.
Shake/stir the container well before use. On external surfaces apply in dry weather or in a period when rain is not predicted for 12 hours. Do not apply when temperature is less than 50C.
Ensure that the surface to be treated is clean, dust free and dry before applying the product.
Contact and cross contamination with solvent borne residues in application equipment must be avoided.
Apply with a roller or brush at recommended application rate. It will self level and create a high gloss mirror finish.
Drying time 4 hours. Full cure achieved in 7 days.
Wait for 1 to 7 days for best effect to be noticed.

3 Litre; 10 litre; 25 litre